Infitek Rotary Extractor Evaporator for Chemical Laboratory

• After-sales Service: Online Technical Support
• Warranty: 2 Years
• Customized: Customized
• Application: Hospital, Lab
• Speed Range: 0-120rpm/Min
• Rotary Motor Power: 60W1/5
• Model NO.: REV Series
• Lifting Motor Power: 40W1/12.5
• Vacuum: 0.095MPa
• Bath Lifting Stroke: 190mm
• Condensing Area: 0.51(0.33+0.18)M2
• Transport Package: High-Quality Cartons/Crates
• Trademark: Infitek
• Origin: China
• Production Capacity: 200 Units/Month

Product Description

 

Infitek Rotary Extractor Evaporator for Chemical Laboratory

Features

Working principle

The evaporation bottle rotates at a constant speed and the water bath is heated at a constant temperature. Under this condition: the material forms a large-area uniform thin film on the inner wall of the evaporation bottle for quick evaporation. The evaporation efficiency can be improved under vacuum conditions (a vacuum device needs to be connected). When the solvent vapor passes through the glass condenser coil, the vapor is cooled to a liquid (a cooling device need to be connected) and recycled in a collection flask.

This series of products needs to be equipped with vacuum devices (circulating water type, rotary vane type, diaphragm type and other vacuum pumps), or cooling and circulating devices to form a system devices.

Basic configuration:

• The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.
• The stent is made of cold plate anti-corrosivespray+ aluminum alloy material, and the bath is made of 304 stainless steel. The sealing system uses PTFE + fluororubber compound sealing.
• Oily vacuum pressure gauge shows real-time vacuum by The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation bottle under vacuum status.
• Upright double-layer serpentine coil as condenser, main condensing + auxiliarycondensing double condenser.
• Large LCD display, which can control rotation, heating and lifting at the same time
• Using brushless deceleration booster motor as rotary motor, no spark and low noise.
• Lifting motor also uses deceleration booster motor.
• Thermostat controlled bath, with PT100 sensor + stainless steel probe at the bottom of bath
• The bath can be lifted electrically. A silicone cover is equipped outside the bath for heat insulation and anti-scalding.
• Rotating and heating double fusessafety protection
• The collection flaskhas a lower discharging port, equipped with glass + PTFE independent discharge valve.
• There is a water dischargingvalve at the bottom of the bath to facilitate liquid discharge
• Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation
• Over-temperature protection function, when the actual temperature> setting temperature+5 ºC, the machine will automatically power off.
• Anti-drying function, when the water level in the heating bath is lower than the heating tube, the machine will automatically power off.
• If the power is suddenly cut off while the machine is working, the machine will automatically stop heating when the power is turned on again

Specification

 

Model	REV-1010II
Voltage/Frequency	220V 50Hz/110V 60Hz
Total Power	3100W
Rotary motor power	60W1/5
Lifting motor power	40W1/12.5
Heating power	3000W
Vacuum	0.095Mpa
Rotary flask volume	10LΦ280mm/Φ95 flange port
Collecting flask volume	5LΦ230mm/upper Φ60 flange port×Φ35 flange port×2 pcs × lower Φ50flange port
Rotary speed	0-120rpm/min
Temperature control range	Room temperature-180ºC
Temperature control accuracy	±1ºC
Bath lifting stroke	190mm
Condenser dimension	Main condenser Φ120×620H(mm), upper Φ60 flange port, lower Φ80 flange port Auxiliary condenser Φ135×475H(mm), upper Φ80 flange port, lower Φ60 flange port, side Φ60 flange port
Condensing area	0.51(0.33+0.18)m^2
Gas cylinder	Left Φ35 flange port, upper Φ35 flange port, side Φ60 flange port, right Φ60 flange port
Material feeding valve	Φ35 flange port, glass + PTFE valve, material feeding valve (pagoda joint) with 12mm outer diameter
Temperature measuring port	Φ35 flange port, glass + PTFE valve, glass valve (pagoda joint) with 12mm outer diameter
Releasing valve	Φ35 flange port×2, glass + PTFE valve, releasing port (pagoda joint)with 12mm outer diameter
Material discharging valve	Φ50 flange port, side discharging valve (pagoda joint) with 20mm outer diameter, 210mm from the ground
Vacuum nozzle	Φ60 flanged glass nozzle(pagoda joint)with 10mm outer diameter
In and out circulating nozzle of condenser coil	Pagoda joint with 16mm outer diameter
Bath dimension/weight	Φ350×220H(mm) about 21L
Overall dimension(W*D*H)	1130×470×1940mm
Net weight	64KG
Packing dimension	980×520×1190mm wooden package 0.61m³
Packing weight	101KG

Packaging & Shipping

 

Certificates

About us

FAQ

Q: How about quality of the goods?

A:lAll the running products comply with CE standards.

lIndependent quality inspection team, conducting multiple inspections and random inspections from parts supply to product dispatch.

lWell-known third-party testing service available, such as SGS, BV, and TUV, etc.

Q: What are your pre- and after-sales services?

A:lTimely reply to pre-sales enquiries

lReal-time update of manufacturing and shipment status

lContracted third-party maintenance company in over 60 countries

   lAssured availability of parts supply for 10 years at least

Q: Is OEM service available.

A: Most of the running products are available for OEM customization, including logo, package and function, if attainable, customization.

Q: How long is the lead time:

A: Generally, the lead time for most stocked products is about 7~15 days, vary by models and production schedule. For those non-stocked products, the manufacturing lead time is around 20 days.