| Customization: | Available |
|---|---|
| After-sales Service: | Free Spare Parts; Online Support |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Infitek -10/ -30/ -40 Refrigerated Circulator/ Recirculating Chiller
This product is mechanically cooled by a totally enclosed compressor. The inner wall of the cooling tank has cooling copper coils. The refrigerant (Freon) continuously circulates through the coil on the inner wall of the water tank to cool the refrigerant in the tank. And then the refrigerant is conveyed to interlayer of the supporting equipment or the condensation coil through built-in circulation pump and external circulation pipeline. This method can cool the material in the reactor indirestly, and also cool & liquefie the steam in contact with condensation tube.
Generally speaking, this product can connect with the interlayer of a double-layer glass reactor, rotary evaporator, and condensation coil of the reactor for usage. It is also feasible to directly put objects or containers which need to be cooled into the bath for cooling or reaction.
The outlet pipe of this product is connected to the lower inlet pipe of the kettle or condenser. The circulating liquid comes out from the upper circulation port and returns to the inlet of this product through the pipe, forming a complete circulation.
| Model | RECL10-5 | RECL30-50 | RECL40-100 | |||
| Usage temperature range | -10 ºC~room temperature | -30 ºC~room temperature | -40ºC ~room temperature | |||
| Environment temperature | 5 ~35 ºC | |||||
| Environment humidity | ≤70% ventilation | |||||
| Power supply | Single phase 220V/50HZ | Single phase 220V 50Hz/110V 60Hz | Three phase 380V/50HZ | |||
| Safety protection | Delay, over-current, overheat | Delay, overcurrent, overheating, phase sequence, phase loss protection | ||||
| Display | LCD display, key operation | |||||
| Temperature control accuracy | ±0.1ºC | |||||
| Sensor | PT100 | |||||
| Total power | 652W | 2485W | 7990W | |||
| Compressor | Specification | Small 1P | Specification | 3P | Specification | 10P |
| Quantity | 1 | Quantity | 1 | Quantity | 1 | |
| Power | 500W | Power | 2205W | Power | 7350W | |
| Cooling capacity | 1550W | Cooling capacity | 6972W | Cooling capacity | 23240W | |
| Circulation pump | Power | 100W | Power | 100W | Power | 280W |
| Lift | 4-6M | Lift | 4-6M | Lift | 10-12M | |
| Flow | 20-40L/min | Flow | 20-40L/min | Flow | 30-50L/min | |
| Pressure | ≤0.4MPa | Pressure | ≤0.4MPa | Pressure | ≤0.4MPa | |
| Air-cooling condenser | Power | 52W | Power | 180W | Power | 360W |
| Heating exchange area | 4.2m² | Heating exchange area | 21.2m² | Heating exchange area | 39m² | |
| Air volume | 760m³/h | Air volume | 3400m³/h | Air volume | 6800m³/h | |
| Refrigerant | R134A | R404A | R22 | |||
| Condensation coil | Φ8 copper tube plated by nickel | Φ16 copper tube plated by nickel | Φ19 copper tube plated by nickel | |||
| Equipment material | Cold plate spray, anti-corrosion | |||||
| Water tank dimension&volume | Φ220×180H(mm) | 6.8L | Φ450×350H(mm) | About 55L | Φ500×500H(mm) | 98L |
| Available size in water tank | Φ185mm | Φ350mm | Φ390mm | |||
| Cover opening | Φ200mm | Φ350mm | Φ350mm | |||
| Outer circulation interface | Pagoda joint with Φ12mm outer diameter (facing the left side of the equipment) | Pagoda joint with Φ16mm outer diameter (facing the left side of the equipment) | Pagoda joint with Φ19mm outer diameter (facing the left side of the equipment) | |||
| Overall dimension(W*D*H) | 423 ×485×(760+ 400)mm | 795×770×(1150+pole 500)mm | 845×1100×(1365+pole 500)mm | |||
| Net weight | 56KG | 119KG | 250KG | |||
| Packing dimension | 590*430*880mm carton package 0.21m³ | 830×740×1280mm wooden package 0.79m³ | 1190×880×1540mm wooden package 1.61m³ | |||
| Packing weight | 58KG | 162KG | 290KG | |||
Q: How about quality of the goods?
A:
l All the running products comply with CE standards.
l Independent quality inspection team, conducting multiple inspections and random inspections from parts supply to product dispatch.
l Well-known third-party testing service available, such as SGS, BV, and TUV, etc.
Q: What are your pre- and after-sales services?
A:
l Timely reply to pre-sales enquiries
l Real-time update of manufacturing and shipment status
l Contracted third-party maintenance company in over 60 countries
Assured availability of parts supply for 10 years at least
Q: Is OEM service available.
A: Most of the running products are available for OEM customization, including logo, package and function, if attainable, customization.
Q: How long is the lead time:
A: Generally, the lead time for most stocked products is about 7~15 days, vary by models and production schedule. For those non-stocked products, the manufacturing lead time is around 20 days.
){kind=link}