| Certification: | CE, FDA |
|---|---|
| Electric Tension: | 220V~240V, 50~60Hz |
| LCD Display: | With LCD Display |
| Ultra High Temperature Alarm: | Ultra High Temperature Alarm |
| Sterilization Information Recording and Printing: | Sterilization Information Recording and Printing |
| Material: | Stainless Steel |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
1. General requirements
1.1 The spraying of cleaning water and the dissolution and stripping of cleaning solution can assist in cleaning the inorganic residues (such as lead, cadmium, arsenic, etc.) and organic residues (such as industrial dyes, hormones, grease, dust, etc.) of laboratory glassware or plastics. After cleaning, the samples can be dried.
*1.2 The organic residue after cleaning is less than 0.1mg/L, and the metal ion residue is less than 0.02mg/L. The provincial authoritative experimental report or certification on the cleaning effect must be provided. In order to ensure the accuracy of the experimental results of trace analysis, the equipment has passed ISO9001, CE and other relevant international authoritative certifications.
1.3 The power supply voltage is 220V.
2. Structural design
2.1 Double-layer detachable heat insulation and sound insulation shell, the inner cavity is made of 316L stainless steel, and the outer shell is made of 304 stainless steel. The visible parts of the box and door should not have exposed screws and rivets to avoid rust in a humid environment.
* 2.2 The whole machine is of horizontal design. The height of the equipment is 1.1 meters, which is basically flush with the test bench, and the upper part is convenient for placing light weight items.
*2.3 There are two layers of cleaning racks in the cleaning cabin; the maximum cleaning height of the lower cleaning racks is 23cm, and the maximum cleaning height of the upper layer is 18cm.The maximum cleaning capacity is to clean 520 2ml liquid phase bottles or 120 vessels (volume flasks, conical flasks, etc.) with a diameter of 7 cm at a time.
*2.4 The original double-layer vacuum glass door is adopted, which can clearly see the internal cleaning, effectively heat insulation and reduce energy consumption.
2.5 It has two water inlets, which can be connected to tap water and pure water at the same time, and which water needs to be entered can be selected through the operation of the control panel.
3. Control system
*3.1 The industrial PLC microcomputer control system is adopted, without ordinary circuit board and single-chip microcomputer control. Industrial PLC is a professional microcomputer, which has special standards and designs for waterproof, anti-electricity, anti-magnetic, etc., and can directly upgrade the control software without changing the circuit, which is easy to upgrade.
*3.2 The control system adopts 7-inch color LCD touch screen, full Chinese operation interface, and Chinese prompts for operation and alarms.
*3.3 The control system has 12 standard cleaning procedures and 99 custom cleaning procedures, which can be set and adjusted for different utensils and requirements.
3.4 The control system adopts three-level password setting, which is convenient for management and operators of different levels to set and manage the parameters.
4. Cleaning system
*4.1 The cleaning water pump is a professional European original imported circulating pump. Its water output is 800L/min, the water output is large, and the scouring force is large. The circulating pump fan blades have been treated with high temperature resistance and can work normally under the disinfection water temperature (above 93 ºC).
*4.2 The washing cabin adopts two parallel water supply, and the side accepts water structure. The structure that the top part receives water and the central part all the way to supply water is not used.The two channels provide water at the same time, reducing the water pressure loss of the one channel of water supply, so that the upper and lower layers have the same water output; Receiving water on the side part, and there is no need to find a water receiving port. It is easy to operate, and the connector is not easy to damage.
*4.3 Both cleaning racks adopt side water inlet and central water outlet structure. The water is discharged from the middle part, and the washing rack connects the water to the middle and distributes the water evenly to each spray column to ensure that each spray column discharges water evenly and the effect of cleaning utensils is consistent.
*4.4 The spray columns of the cleaning rack shall be distributed in parallel rather than around the center, so as to ensure the consistent distance between each spray column and facilitate the placement and estimation of utensils while increasing the cleaning amount.
*4.5 The cleaning rack does not have a tall central water inlet pipe, which saves space and is convenient to place; the upper and lower floors of the cleaning rack can be interchanged to facilitate the arrangement of utensils.
*4.6 The cleaning cabin has a built-in double-layer 360-degree rotating spray arm, and the nozzle adopts a fan-shaped nozzle design, which sprays a fan-shaped water curtain with large scouring force and no dead ends. No simple small hole nozzle is used to reduce the dead angle of external spraying.
4.7 The glassware washer adopts an automatic heating system during cleaning, and the heating temperature is adjustable. The maximum temperature can reach 93°C, reaching the disinfection level.
4.8 The cleaning solution and neutralization solution are automatically added by two peristaltic pumps, and the added dosage can be set.
5. Drying system
*5.1 Injection hot-air drying. The filtered air is heated and directly connected to the spray pipe. The air temperature can be adjusted from room temperature to 120°C. The hot air will not only dry the utensils but also dry the pipe at the same time to prevent internal water accumulation.
5.2 The dry air passes through a high-efficiency filter with an efficiency of 99.99% to ensure that the air entering the cleaning cabin is clean and avoiding secondary pollution of the cleaning items.
*5.3 With filter alarm function, it can automatically determine whether the filter needs to be replaced. No matter the filter expires or is accidentally damaged, an alarm will be issued and a Chinese prompt will be given.
5.4 Equipped with dual steam condensing devices to prevent the discharge of hot steam into the laboratory during work from polluting the experimental environment.
5.5 The internal and external balance air pressure hole design makes it unnecessary to circulate and supplement the internal humid air during drying, effectively shortening the drying time.
6. Safety protection
6.1 Safe door lock design, the door body is locked and cannot be opened during the cleaning process, preventing water spraying and scalding caused by misoperation;It has the function of the emergency door opening, which can quickly open the door and take out the utensils after power failure.
6.2 The door lock adopts the upper two-point locking structure. The left and right sides of the upper door body are connected to the door frame for locking. Compared with the single-point door lock connected in the middle, the seal is more reliable and prevents water and steam from overflowing.
6.3 It has a complete protection function, with a lack of cleaning agent alarm, the main washing pump over-temperature protection function, heating and anti-dry function, the main washing pump idling protection function, water level sensor detection function, cleaning chamber over-temperature protection function, all have Chinese prompt and alarm reminder.
6.4 It has the function of program self-checking and equipment self-cleaning, which can perform self-checking on the set program. After cleaning, the equipment can also be automatically cleaned to reduce residues.
| Model | LWD-200 |
| The volume of the cleaning chamber | ≥200L |
| Package Dimension (W*D*H)(mm) | 1110*940*1350 |
| Power supply (V/HZ) | 220V/50Hz |
| Water cleaning power | ≤0.75KW |
| water heating power | ≥5KW fast heating |
| drying power | ≥2.1KW |
| air volume | ≥120L/M3 |
| Water temperature control | room temperature to 99ºC |
| Configure 2 cleaning racks | |
| Equipped with imported one barrel of cleaning liquid and one barrel of neutralizing liquid. | |
1. Does the washing machine need to use pure water throughout?
The washing machine is an automatic device, connected to tap water and pure water at the same time. Generally, it is cleaned with tap water in the front, and pure water is used for the final rinsing, which saves pure water while ensuring the cleaning effect. Both tap water and pure water can be set through the control system, and enter automatically after setting, without manual switching.
2. How long is the cleaning time?
The working process of the washing machine takes about one hour to one and a half hours. Mainly, the washing machine needs a certain temperature of hot water to flush the utensils to ensure the effectiveness and cleaning effect of the cleaning liquid, so the cleaning time is mainly consumed in the heating of the water supply. The washing machine has also added a configuration that shortens the heating time, such as 380V 15KW heating, and the normal work can reduce the washing machine time by about 20 minutes.
3. Does the washing machine have a frequency conversion function?
It has a patent certificate that automatically adjusts the cleaning pressure and can realize the frequency conversion function.
4. Is there any situation that cannot be cleaned?
In the case that the dry-burned, dried-up substances on the utensils and the brush cannot be cleaned, the cleaning machine cannot guarantee the effect, but this type can also be cleaned by combining the immersion and ultrasonic process in the laboratory.
5. Does the washing machine have requirements for the inlet water pressure?
The washing machine has requirements for the water pressure of the tap water, and the water pressure of the normal tap water pipeline is required; for pure water, the water pressure is not
On request, the washing machine has a built-in pure water booster pump, which can independently suck water from the pure water bucket without boosting.
6. What kind of cleaning fluid are you?
We usually recommend the use of RBS cleaning fluid, which is originally imported from Belgium and has a good cleaning effect.
The cleaning solution is usually alkaline washed first, and then neutralized by the acid. Generally, organic or inorganic substances will be decomposed and peeled off under the action of strong alkali to achieve a good cleaning effect.
7. Can the cleaning basket of your washing machine be customized?
The cleaning baskets currently on display basically cover most of the specifications and types of utensils cleaned in conventional laboratories. In general, choosing from the existing cleaning baskets is sufficient for use, and the baskets are also compatible to a certain extent. If it is indeed a special utensil and you also want to clean it, you can customize the basket, but the customization of the basket takes time.
8. Does your washing machine have a plan for instantly judging the cleaning result?
Optional distribution conductivity monitoring system can be used to verify the cleaning effect from the side in real-time.
9. Which model do you recommend?
The recommended model of the washing machine is mainly determined according to the type, specification, and quantity of the utensils required for the test, and the configuration will also be considered according to the requirements of the customer. The conventional 200 and 220 models are the most used, and if the amount of cleaning is relatively small, the 120 configurations can be considered; if the drying requirements are not high or the budget is not high, then the 200S models are more suitable.
10. The customer requires three inlets for hot/cold/pure water. Does the parameter conflict with the customer's requirements?
The machine itself has a heating system, and self-heated water can be added from the pure water port.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}