Infitek CE Approved pH/Ec/ISE/Temp. Multi-Parameter Water Quality Meter/ Multi-Parameter Analyzer

• Customization: Available
• After-sales Service: Free Spare Parts; Online Support
• Warranty: 2 Year
• Model NO.: BEP-M310A
• Display: LCD Display Screen, 3.5 Inches
• Appliance: Laboratory
• Portable: Portable
• Certification: CE, ISO9001, FDA
• Type: Multi-Parameter Analyzer
• Transport Package: High-Quality Cartons
• Specification: 80*255*35 mm
• Trademark: Infitek
• Origin: China
• Production Capacity: 200 Units/Month

Product Description

Infitek CE Approved pH/EC/ISE/Temp. Multi-parameter Water quality Meter/ Multi-parameter Analyzer

Features

The BEP-M310A Portable Multi-parameter Analyzer adopts a multi-purpose measurement method, which is suitable for the fields of health disease control, environmental protection, biological agriculture and forestry, water quality analysis, scientific research and institutions of higher learning.

General Features

1. LCD display screen, 3.5 inches.
2. Multi-reading feature allows auto-read, timed-read and continuous-read.
3. Automatic/Manual temperature compensation ensures accurate results.
4. Auto-hold feature senses and locks the measurement endpoint.
5. Data capacity of up to 500 sets for each parameter (GLP-compliant).
6. Support for USB communication.
7. Auto-power off feature effectively extends the battery service life.
8. Reset feature automatically resumes all settings back to factory default options.
9. IP65 waterproof.

pH

1. 1-5 points calibration with Standard Recognition.
2. Selectable pH buffer groups, including NIST, DIN, GB.
3. Automatic electrode diagnosis with pH slope and offset display.

Ion

1. 1-5 points calibration.
2. Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.
3. Measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
4. Over 10 methods are built-in, including F^-, Cl^-, Br^-, I^-, NO₃^-, BF₄^-, NH₄⁺, K⁺, Na⁺, Ca²⁺, Cu²⁺, Pb²⁺, Ag⁺and etc., user-defined method is supported.

Conductivity

1. 1-3 points calibration with Standard Recognition.
2. Settable parameters, including cell constant, temperature compensation coefficient, and TDS factor.
3. Temperature compensation type (none, linear, pure water).

Specification

Model		BEP-M310A
Parameters		pH/EC/ISE/Temp. (mV/ORP/pX/Resistivity/TDS/Sal.)
pH	Range	-2.00 to 20.00 pH
	Resolution	0.1, 0.01 pH
	Accuracy	±0.01 pH
	Calibration Points	Up to 5
	Standard Customization	Yes
	Standard Recognition	NIST, GB and DIN buffers
	Slope Limit	Yes
mV	Range	-2000.0 to 2000.0 mV
	Resolution	0.1
	Accuracy	±0.3 mV or ±0.1%
pX	Range	-2.00 to 20.00
	Resolution	0.1, 0.01 pX
	Accuracy	±0.01 pX
	Calibration Points	Up to 5
ISE	Range	1E-9 to 9.999E9
	Units	mol/L, mmol/L, g/L, mg/L, μg/L
	Resolution	Up to 4 significant digits
	Accuracy	±0.5%
	Calibration Points	Up to 5
Conductivity	Range	0.000 μS/cm to 500 mS/cm
	Resolution	0.001 μS/cm minimum, various with range selection
	Accuracy	±1.0% FS
	Reference Temperature	20, 25 ºC
	Calibration Points	Up to 3
	Standard Recognition	84μS/cm, 1413μS/cm, 12.88mS/cm
Resistivity	Range	5.00 Ω·cm~20.00 MΩ·cm
	Resolution	0.01 Ω·cm minimum
	Accuracy	±1.0% FS
TDS	Range	0.00 ppm~300 ppt
	Resolution	0.01ppm minimum, various with range selection
	Accuracy	±1.0%FS
Salinity	Range	0.0~80.0 ppt
	Resolution	0.1ppt
	Accuracy	±2ppt
Temperature	Range	-5 to 110 ºC, 23 to 230 ºF
	Unit	ºC, ºF
	Resolution	0.1
	Relative Accuracy	±0.2
Measurement	Reading Mode	Auto Read (Fast, Medium, Slow), Timed, Continuous
	Reading Prompts	Reading, Stable, Locked
	Temp. Compensation	ATC, MTC
Data management	Data Storage	500 results each
	GLP Features	Yes
Inputs	pH Electrode	BNC(Q9)
Inputs	Conductivity with Temp. Probe	5-pin aviation connector
Outputs	USB	PC, printer
Display options	Backlight	Yes
	Auto Shutdown	300, 600, 1200, 1800, 3600 sec., off
	IP Rating	IP65
	Date and Time	Yes
General	Electricity	Rechargeable Lithium battery, AC Adapter, 100-240V AC input, DC5V output
	Dimensions	W80×D255×H35 mm
	Package Dimension	W520×D430×H240
	N.W./G.W.	0.4kg/5kg

Packaging & Shipping

 

Certifications

 

About us

 

 

FAQ

Q: How about quality of the goods?

A:

l All the running products comply with CE standards.

l Independent quality inspection team, conducting multiple inspections and random inspections from parts supply to product dispatch.

l Well-known third-party testing service available, such as SGS, BV, and TUV, etc.

 

Q: What are your pre- and after-sales services?

A:

l Timely reply to pre-sales enquiries

l Real-time update of manufacturing and shipment status

l Contracted third-party maintenance company in over 60 countries

Assured availability of parts supply for 10 years at least

 

Q: Is OEM service available.

A: Most of the running products are available for OEM customization, including logo, package and function, if attainable, customization.

 

Q: How long is the lead time:

A: Generally, the lead time for most stocked products is about 7~15 days, vary by models and production schedule. For those non-stocked products, the manufacturing lead time is around 20 days.