Infitek Rev-1050II 50L Industrial Sacle Digital Rotary Evaporator

• Customization: Available
• After-sales Service: Online Technical Support
• Warranty: 2 Years
• Model NO.: REV-1050II
• Customized: Customized
• Application: Hospital, Lab
• Rotation Speed: 20rpm~180rpm
• Transport Package: High-Quality Cartons/Crates
• Trademark: Infitek
• Origin: China
• Production Capacity: 200 Units/Month

Product Description

 

Infitek REV-1050II High Quality 20L Industrial Digital Rotary Evaporator 

 

Features

1. The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.
2. The stent is made of cold plate anti-corrosivespray + aluminum alloy material, and the bath is made of 304 stainless steel.
3. The sealing system uses PTFE + fluororubber compound sealing.
4. Oily vacuum pressure gauge shows real-time vacuum bypointer.
5. The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation bottle under vacuum status.
6. Uprightthree-layerserpentine coil as condenser, main condensing+auxiliary condensing double condenser.
7. Large LCD display, which can control rotation, heating and lifting at the same time
8. Using brushless deceleration booster motor as rotary motor, no spark and low noise.Lifting motor also uses deceleration booster motor.
9. Thermostat controlled bath, with PT100 sensor + stainless steel probe at the bottom of bath.
10. The bath can be lifted electrically. A silicone cover is equipped outside the bath for heat insulation and anti-scalding.
11. Rotating and heating double fusessafety protection.
12. The collection bottle has a lower dischargingport, which is connected to glass + PTFE independent discharge valve.
13. There is a water discharge valve at the bottom of the bath to facilitate liquid discharge.
14. Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation
15. Over-temperature protection function, when the actual temperature> setting temperature+5 ºC, the machine will automatically power off.
16. Anti-drying function, when the water level in the heating bath is lower than the heating tube, the machine will automatically power off.
17. If the power is suddenly cut off while the machine is working, the machine will automatically stop heating when the power is turned on again.

Specification

Model	REV-1050II
Voltage/Frequency	220V 50Hz/110V 60Hz
Total Power	6640W
Rotary motor power	100W
Lifting motor power	40W
Heating power	6500W
Vacuum	0.095Mpa
Rotary flask volume	50LΦ470mm/Φ125 flange port
Collecting flask volume	20LΦ355mm/upper Φ60 flange port×Φ35 flange port×2pcs×lower Φ50 flange port
Rotary speed	0-120rpm/min
Temperature control range	Room temperature-180ºC
Temperature control accuracy	±1ºC
Bath lifting stroke	215mm
Condenser dimension	Main condenser Φ160×835H(mm), upper Φ60 flange port, lower Φ80 flange port   Auxiliary condenser Φ160×530H(mm), upper Φ80 flange port, lower Φ60 flange port, side Φ60 flange port
Condensing area	1.44(0.95+0.49)m²
Gas cylinder	Left Φ35 flange port, upper Φ35 flange port, side Φ60 flange port, right Φ70 flange port
Material feeding valve	Φ35 flange port, glass + PTFE valve, material feeding valve (pagoda joint) with 12mm outer diameter
Multi-function port	Φ35 flange port, glass + PTFE valve, glass valve (pagoda joint) with 12mm outer diameter
Releasing valve	Φ35 flange port×2pcs, glass + PTFE valve, releasing valve (pagoda joint) with 12mm outer diameter
Material discharging valve	Φ50 flange port, side discharging valve (pagoda joint) with 20mm outer diameter, 300mm from the ground
Vacuum nozzle	Φ60 flanged glass nozzle(pagoda joint)with 10mm outer diameter
In and out circulating nozzle of condenser coil	Pagoda joint with 16mm outer diameter
Bath dimension/weight	Φ550×320H(mm) about 76L
Overall dimension(W*D*H)	1390×700×2300mm
Net weight	97KG
Packing dimension	980×520×1190mm wooden package 0.61m³
Packing weight	142KG

Packaging & Shipping

 

 

Certificates

 

 

About us

FAQ

1.What is the mechanism of manual lifting and auxiliary lifting of manual rotary evaporator?
The manual lifting part is a mechanical constant force lifting mode, which is safe, reliable, and low failure; the auxiliary lifting part is a stepless mechanical positioning adjustment.
2.Is it possible for a small rotary evaporator with a 5L evaporating flask?
It is not recommended to use this way, there is a risk. The excessive load of the glass shaft will cause the bearing parts to wear and reduce the life, which will affect the sealing performance. In severe cases, the shaft tube may be broken.
3.REV100-Pro can only rotate at a maximum of 280rpm when the forward and reverse rotation is set, and only 200rpm for one-way rotation. Why?
One-way rotation can reach 280rpm, no problem. To ensure safety, the maximum speed is limited to 200rpm.
4.Is it better to put the rotary steaming system in a fumehood?
   It is better to put the rotary steaming system in a fume hood, and the taste can be discharged directly outside.
5.Is magnetic inspection required for air transportation?
There is a lifting motor, which requires magnetic inspection.
6.How to connect the rotary steaming and vacuum controller, and what is the function of the vacuum pump?
The vacuum controller is connected between the rotary steamer and the vacuum pump, in series. When using a rotary evaporation evaporator, the vacuum degree is not appropriate, and the reagents will suddenly boil and bump. By using a vacuum controller, in series with the rotary evaporation, the internal vacuum of the rotary evaporation can be accurately controlled, especially for the concentration of volatile reagents, which can achieve the maximum The most ideal recovery rate. It is also widely used in the vacuum distillation of organic reagents, the gradual control of the vacuum degree, and the gradual extraction of solvents.
7.What materials are our nuts and plastic parts made of? 
Most of the nuts are stainless steel, and most of the plastic parts are fireproof ABS
8.Rotary steaming to collect bottle mouth and clip process?
The mouth of the bottle is called a frosted oxide coating on the surface, and the clip is polished.
9.Is the stainless steel sprayed or coated on the outside of the rotary steaming heating pot?
Stainless steel electrolytic polishing, the outer plastic shell is injection molded

 

m