| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Infitek REV-1000AX lab-scale Rotary Evaporator rotovap
| Model | REV-1000AX |
| Use Range of Sample Bottle | 25~1000ml |
| Rotation Speed | Touch screen display, 0~310rpm/min |
| Vacuum Control | Vacuum control range; 0~-0.1Mpa (0~1013mbar); precision ±1Mpa (, vacuum degree can be controlled arbitrarily. Automatic pressure release at the end of the experiment, jog/one-key pressure release function; 10-stage gradient distillation program control, step-by-step control of vacuum degree during synthesis experiment chromatography vacuum distillation; commonly used 39 kinds of experimental data storage, one-key start, fast distillation. |
| Evaporation Capacity | Max.25mL/min(H2O) |
| Equipment Vacuum | The vacuum inside the equipment can reach 2mbar. |
| Temperature Adjustment Range | Water and oil dual-purpose bath, water bath: room temperature ~99°C, ±0.5; oil bath: room temperature ~210°C, ±2°C; |
| Material of Heating Bath | One-time forming coating, easy to clean, corrosion resistance, high temperature resistance; heating pot with safety handle, shell heat insulation, prevent scald, moderate volume, rapid heating; equipped with a transparent protective cover: heat preservation, energy saving, explosion-proof, anti-corrosion splash. |
| Bath Dimension |
φ20*11.5cm (approximately 3.5L), the sliding base of the heating bath can freely move 120mm to the right. |
| Sample Bottle | Forward rotation, reverse rotation, intermittent forward and reverse rotation, the intermittent time can be adjusted from 0 to 60s, which can be used for drying powder samples. |
| Temperature Control | Dual touch screen control system, digital display, over-temperature warning, automatic lifting, automatic pressure relief, and equipment shutdown functions. |
| Temperature Setting | Touch-type digital input setting, dual-screen control display, convenient and quick. |
| Safety Performance | Anti-dry over-temperature early warning, abnormal rotating motor early warning, automatic lifting of the sample bottle to the highest; Timing function (0~999min), when the preset time is reached, the equipment will automatically release the pressure, lift and lower the evaporating bottle automatically, and the equipment will be standby for early warning and protection. |
| Heater | Fully enclosed heater. Power 1kW |
| Sealing Parts | Imported PTFE special synthetic material is selected, and the abrasive tool is synthesized through special process technology to enhance sealing, corrosion resistance and wear resistance. |
| Condenser | Vertical, three-layer ball mill mouth serpentine condenser, condensation area 0.18m², with drop point and backflow design (effectively improve work efficiency). |
| Ambient Temperature | 5~40ºC |
| Electricity | AC220V/50Hz |
| External Dimensions | 55*36*64cm |
| Shipping Dimensions | 67*50*46.5cm |
| G.W, | 34kg |
| Factory Configuration | Sample bottle 1L*1; recovery bottle S35# ball mill mouth collection bottle 0.5L*1. |
1.What is the mechanism of manual lifting and auxiliary lifting of manual rotary evaporator?
The manual lifting part is a mechanical constant force lifting mode, which is safe, reliable, and low failure; the auxiliary lifting part is a stepless mechanical positioning adjustment.
2.Is it possible for a small rotary evaporator with a 5L evaporating flask?
It is not recommended to use this way, there is a risk. The excessive load of the glass shaft will cause the bearing parts to wear and reduce the life, which will affect the sealing performance. In severe cases, the shaft tube may be broken.
3.REV100-Pro can only rotate at a maximum of 280rpm when the forward and reverse rotation is set, and only 200rpm for one-way rotation. Why?
One-way rotation can reach 280rpm, no problem. To ensure safety, the maximum speed is limited to 200rpm.
4.Is it better to put the rotary steaming system in a fumehood?
It is better to put the rotary steaming system in a fume hood, and the taste can be discharged directly outside.
5.Is magnetic inspection required for air transportation?
There is a lifting motor, which requires magnetic inspection.
6.How to connect the rotary steaming and vacuum controller, and what is the function of the vacuum pump?
The vacuum controller is connected between the rotary steamer and the vacuum pump, in series. When using a rotary evaporation evaporator, the vacuum degree is not appropriate, and the reagents will suddenly boil and bump. By using a vacuum controller, in series with the rotary evaporation, the internal vacuum of the rotary evaporation can be accurately controlled, especially for the concentration of volatile reagents, which can achieve the maximum The most ideal recovery rate. It is also widely used in the vacuum distillation of organic reagents, the gradual control of the vacuum degree, and the gradual extraction of solvents.
){kind=link}