| Customization: | Available |
|---|---|
| After-sales Service: | Online Technical Support |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Infitek Rev100-P Lab Digital Rotary Evaporator with Brushless DC Motor
• Digital display of both rotation speed and heating temperature allows for optimal control of all distillation processes
• Automatic motor lift releases the evaporating flask to a safe position in case of power failure
• 5L heating bath with wide temperature range from room temp. to 180°C. Water/oil heating mode can be changed only through a switch.
• Overheating protection temperature at 220°C
• Speed range from 20 to 280rpm, and interval operation in clockwise and anticlockwise directions for drying process
• Patented condenser (cooling surface 1700cm²) with excellent cooling effect
• Ejection mechanism ensures easy removal of evaporating flask
• Patented double spring sealing ring which is made of PTFE provides an excellent sealing performance
• Remote function provides PC control and data transmission
| Specifications | REV100-P |
| Motor Type | Brushless DC motor |
| Speed Range | 20rpm-280rpm |
| Display | LCD (speed, temperature, time) |
| Clockwise and Anti-clockwise | Yes |
| Heating Temperature Range | Room temp. to 180ºC |
| Control Accuracy | water: ±1ºC oil: ±3ºC |
| Heating Power | 1300W |
| Stroke Displacement | automatic 150mm |
| Timer | Yes |
| Time Setting Range | 1-999min |
| Dimension (D×W×H) | 465×457×583mm |
| Weight | 37kg |
| Package dimensions | 1100*600*650mm |
| Gross weight | 39kg |
| Permissible Ambient Temperature | 5ºC-40ºC |
| Permissible Relative Humidity | 80%RH |
| Protection Class | IP20 |
| USB Interface | Yes |
| Voltage/Frequency | 100V-120V/200V-240V 50Hz/60Hz |
| Power | 1400 W |
1.What is the mechanism of manual lifting and auxiliary lifting of manual rotary evaporator?
The manual lifting part is a mechanical constant force lifting mode, which is safe, reliable, and low failure; the auxiliary lifting part is a stepless mechanical positioning adjustment.
2.Is it possible for a small rotary evaporator with a 5L evaporating flask?
It is not recommended to use this way, there is a risk. The excessive load of the glass shaft will cause the bearing parts to wear and reduce the life, which will affect the sealing performance. In severe cases, the shaft tube may be broken.
3.REV100-Pro can only rotate at a maximum of 280rpm when the forward and reverse rotation is set, and only 200rpm for one-way rotation. Why?
One-way rotation can reach 280rpm, no problem. To ensure safety, the maximum speed is limited to 200rpm.
4.Is it better to put the rotary steaming system in a fumehood?
It is better to put the rotary steaming system in a fume hood, and the taste can be discharged directly outside.
5.Is magnetic inspection required for air transportation?
There is a lifting motor, which requires magnetic inspection.
6.How to connect the rotary steaming and vacuum controller, and what is the function of the vacuum pump?
The vacuum controller is connected between the rotary steamer and the vacuum pump, in series. When using a rotary evaporation evaporator, the vacuum degree is not appropriate, and the reagents will suddenly boil and bump. By using a vacuum controller, in series with the rotary evaporation, the internal vacuum of the rotary evaporation can be accurately controlled, especially for the concentration of volatile reagents, which can achieve the maximum The most ideal recovery rate. It is also widely used in the vacuum distillation of organic reagents, the gradual control of the vacuum degree, and the gradual extraction of solvents.
7.What materials are our nuts and plastic parts made of?
Most of the nuts are stainless steel, and most of the plastic parts are fireproof ABS
8.Rotary steaming to collect bottle mouth and clip process?
The mouth of the bottle is called a frosted oxide coating on the surface, and the clip is polished.
9.Is the stainless steel sprayed or coated on the outside of the rotary steaming heating pot?
Stainless steel electrolytic polishing, the outer plastic shell is injection molded
){kind=link}